Top 10 common forklift mishaps ， forklift procedure must focus on these issues ！.

Top 10 common forklift mishaps ， forklift procedure must focus on these issues ！.

Blog Article

Do not ignore the forklift at the workplace. If the operation is not good, there will be major mishaps in mins, and there are several crashes involving forklifts.

Case 1: The forklift cargo blocked the chauffeur's sight, and the person in front could not be discovered, leading to a rolling accident.
Case 2: In order to maintain the balance of the forklift when raising hefty items, the staff members utilized their body weight as the weight, which virtually created casualties.
Situation 3: The width of the forklift cargo exceeds the allowable size of the course and holds on the roadside shelf, which almost causes an crash.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not observe the forklift.
Case 6: The forklift lifts the employees illegally, the forklift chauffeur does not wear the safety belt, the forklift lifter falls and the driver is squashed when the forklift surrender.
Case 7: The forklift driver did not put on a seat belt and dropped from the automobile when it rolled over and was squashed.
Forklift procedure ought to pay attention to these issues ：.

Begin.
1. Before beginning, observe the surroundings, and after verifying that there are no challenges that hinder the safety and security of driving, honk the horn initially and after that start.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift starts with a lots, the driver ought to initially confirm that the lots is stable and reliable.
4. The begin has to be sluggish and steady.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not lift the fork expensive when driving. When entering and leaving the task website or while driving, be careful that there will be no barriers in the sky. When the tons is taking a trip, the fork must not be increased expensive, which will certainly affect the stability of the forklift. .
3. After dumping, the fork should be reduced to the regular driving position before driving. .
4. When turning, if there are pedestrians or lorries close by, the driving signal ought to be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will trigger the lorry to shed side stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to comply with the traffic rules in the factory and must keep a certain safety distance from the car in front. .
7. When the forklift is running, the tons should be in the lowest setting that does not hinder the driving, and the gantry ought to be correctly tilted back. The load shall not be raised except when piling or filling. .
8. The elevation of the tons need to not block the chauffeur's sight. In special circumstances, when the item affects the forward vision, drive at a reduced rate when reversing.
9. It is prohibited to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when getting in the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is prohibited for workers to stand on the fork to hold things and play a stabilizing role. .
12. If problems are located, they will certainly be repaired and reported in a prompt way, and they will never ever run with diseases or hide them.

packing and unloading.
1. When fork-loading things, the range between both forks ought to be adjusted as required to make the load of both forks balanced and not skewed, and one side of the product ought to protest the rack. .
2. It is restricted to deal with a single fork or make use of a fork top or pull. In special conditions, security indication should be established to remind bordering pedestrians. .
3. In the process of packing and dumping products, the forklift must be braked with the brake. .
4. The rate of the car need to be sluggish and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure people. .
5. When utilizing a fork to fork the goods, the fork should be as deep as possible under the lots, and it ought to be kept in mind that the fork tip must not touch various other goods or items. The lots ought to be maintained with minimal back tilt of the gantry to ensure that the lots does not slide backwards. The pole can be slanted forward somewhat when the lots is lowered to enable very easy positioning of the load and extraction of the forks. .
6. It is restricted to fork items at high speed and hit difficult things with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is forbidden, and it is banned to use forks to lift personnel to participate in high-altitude procedures to avoid high-altitude dropping mishaps. .
9. It is not permitted to utilize the brake inertia to slip, put, round or roll items. .
10. It is not allowed to utilize forks to pick, turn pallet unload.

Leaving .
1. It is restricted to leave the forklift when the products on the fork impend. Before leaving the forklift, you have to discharge the goods or lower the fork frame.
2. Draw the hand brake deal with to dead or depress the parking brake button.
3. The engine is shut off and the power is removed. (Except for special conditions, such as the motorist does not leave the vehicle's view and does not go beyond 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look needs to be checked, and fuel, lubricating oil and air conditioning water need to be included.
2. Check the Electric Forklift Truck for Warehouse safety efficiency of beginning, running and braking.
3. Examine whether the lights and horn signals are complete and effective.
4. During the operation of the forklift, examine whether the pressure and temperature are regular.
5. After the forklift is running, the exterior leak needs to likewise be checked and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You have to examine prior to leaving the automobile;.
2. When you come across somebody in front of you during driving, you Electric Forklift Truck for Warehouse must send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The turning need to not be as well sharp to prevent the propensity of " totally free turning";.
6. Running up and down the incline must be sluggish and uniform, and no turning on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven in reverse when going downhill;.
8. When the forklift employees carry the goods and move on, if they run into big or heavy items and go to the chauffeur's view, they ought to take the turning around workout
.
The "Eight Prohibitions" ought to be followed in the procedure.
1. Single fork operation is not enabled.
2. It is not permitted to raise the goods for long distance driving.
3. It is not allowed to get the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not enabled to make use of inertia pressure to get the goods.
6. It is not permitted to utilize braking force to exile round or easy-to-roll objects.
7. It is not enabled to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is elevated.
8. Do not drive laterally on inclines
.
Car park is not allowed under the list below problems.
1. Curves, slim roadways, railway crossings;.
2. Sections with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the same length as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844